deeptenk2
Moderator
Lenovo ThinkPad X200, X200s
Versions 3.22 (6DET72WW) (for BIOS ID 6Dxxxxxx-based computer)
3.22 (7XET72WW) (for BIOS ID 7Xxxxxxx-based computer)
----------------------
!!! Original (non modified) SAME version bios SHOULD be flashed at first !!!
then after reboot - flash modified bios.
_______________________________________________
Check the BIOS ID before the mod flashing !!!!
for TP-6D use TP-6D folder
for TP-7X use TP-7X folder
__________________________
for WListed mod flashing :
run the WinPhlash (as Administrator), click "Advanced Settings" then check and uncheck the boxes so it looks like this:
("Flags" Tab):
[ ] Verify BIOS part number
[ ] Flash only if BIOS version is different
[ ] Flash only if BIOS version is newer
[ ] Verify BIOS image size
[ ] Verify BIOS checksum
[ ] Zero block before erasing
[x] Verify block after programming
[x] Disable Axx swaping automatic detection (if present)
[ ] Clear CMOS Checksum
("DMI" tab)
"Update": Select "Update the BIOS and not DMI"
___________
To adding the SLic 2.1 (Lenovo) - use a Lenovo's pure DOS based marker tool:
create a DOS bootable flash. Copy the contents of the "MarkerTool" ("TP-6D" or "TP-7X" according your BIOS ID) folder to flash.
boot to pure DOS and run SETMARK.bat.
After reboot - check Slic in bios with Slictoolkit.
Versions 3.22 (6DET72WW) (for BIOS ID 6Dxxxxxx-based computer)
3.22 (7XET72WW) (for BIOS ID 7Xxxxxxx-based computer)
----------------------
!!! Original (non modified) SAME version bios SHOULD be flashed at first !!!
then after reboot - flash modified bios.
_______________________________________________
Check the BIOS ID before the mod flashing !!!!
for TP-6D use TP-6D folder
for TP-7X use TP-7X folder
__________________________
for WListed mod flashing :
run the WinPhlash (as Administrator), click "Advanced Settings" then check and uncheck the boxes so it looks like this:
("Flags" Tab):
[ ] Verify BIOS part number
[ ] Flash only if BIOS version is different
[ ] Flash only if BIOS version is newer
[ ] Verify BIOS image size
[ ] Verify BIOS checksum
[ ] Zero block before erasing
[x] Verify block after programming
[x] Disable Axx swaping automatic detection (if present)
[ ] Clear CMOS Checksum
("DMI" tab)
"Update": Select "Update the BIOS and not DMI"
___________
To adding the SLic 2.1 (Lenovo) - use a Lenovo's pure DOS based marker tool:
create a DOS bootable flash. Copy the contents of the "MarkerTool" ("TP-6D" or "TP-7X" according your BIOS ID) folder to flash.
boot to pure DOS and run SETMARK.bat.
After reboot - check Slic in bios with Slictoolkit.