!!! Original (non modified) SAME version bios SHOULD be flashed at first !!!
then after reboot - flash modified bios.
_________
for WListed mod flashing :
run the WinPhlash (or WinPhlash64) as Administrator, click "Advanced Settings" then check and uncheck the boxes so it looks like this:
("Flags" Tab):
[ ] Verify BIOS part number
[ ] Flash only if BIOS version is different
[ ] Flash only if BIOS version is newer
[ ] Verify BIOS image size
[ ] Verify BIOS checksum
[ ] Zero block before erasing
[x] Verify block after programming
[x] Disable Axx swaping automatic detection (if present)
[ ] Clear CMOS Checksum
("DMI" tab)
"Update": Select "Update the BIOS and not DMI"
___________
To adding the SLic 2.1 (Lenovo) - use a Lenovo's pure DOS based marker tool:
create a DOS bootable flash. Copy the contents of the "MarkerTool" folder to flash.
boot to pure DOS and run SETMARK.bat.
After reboot - check Slic in bios with Slictoolkit.
then after reboot - flash modified bios.
_________
for WListed mod flashing :
run the WinPhlash (or WinPhlash64) as Administrator, click "Advanced Settings" then check and uncheck the boxes so it looks like this:
("Flags" Tab):
[ ] Verify BIOS part number
[ ] Flash only if BIOS version is different
[ ] Flash only if BIOS version is newer
[ ] Verify BIOS image size
[ ] Verify BIOS checksum
[ ] Zero block before erasing
[x] Verify block after programming
[x] Disable Axx swaping automatic detection (if present)
[ ] Clear CMOS Checksum
("DMI" tab)
"Update": Select "Update the BIOS and not DMI"
___________
To adding the SLic 2.1 (Lenovo) - use a Lenovo's pure DOS based marker tool:
create a DOS bootable flash. Copy the contents of the "MarkerTool" folder to flash.
boot to pure DOS and run SETMARK.bat.
After reboot - check Slic in bios with Slictoolkit.
Вкладення
Останнє редагування модератором: